Aquaphor Morion/DWM Reverse Osmosis

  • Aquaphor Morion presents a giant leap in drinking water treatment technology. With Aquaphor Morion you get perfectly clean and pure water through reverse osmosis in the most comfortable way at a significantly lower cost.

    Aquaphor Morion Reverse Osmosis Technology Video

    Purified water

    Morion provides the same quality of purified water as premium bottled water. Reverse-osmosis removes virtually all impurities from your water including hardness, chlorine, lead and other metals, bacteria, viruses, Giardia cysts and many more. Water from Morion becomes better for your health and tastes great!

    Ultra post-filtration

    Clean water in a storage tank is a comfortable environment for bacteria propagation. To contain them and prevent their growth, Morion is equipped with a state-of-the-art composite bactericidal post-filtration cartridge that stops all impurities down to 0.1 micron (including bacteria and Giardia cysts).

    Extreme compactness

    Morion has up to a 50% smaller water wastage footprint than traditional RO purifiers, thanks to its built-in storage tank. It is compact enough to fit under your sink. Living in a small or old house is no longer an excuse for drink­ing bad quality water. You deserve the best quality drinking water!

    Efficient water storage tank - Works at 2+ atm

    Morion is equipped with a water-on-water storage tank that creates zero counter-pressure for filtered water. This allows you to effectively use Morion at a water pressure as low as 2 atm. without needing a boosting pump. The tank can also be filled with purified water in only 1 hour at the lowest operating pressure.

    Save up to 50% of wasted water - Save 9 tons of water every year

    Due to efficient storage tank membrane and valve system, Morion remains the ratio of wasted-to-filtered water below 4:1 no matter how much water there is in the tank and how high is the pressure in water supply.

    For traditional RO purifiers with air-on-water storage tank this ratio varies between 10 and 15 at approx. 3 atm pressure and grows towards the end of tank fulfillment.

    Given the fact that we usually use 1-2 liters of filtered water at a time, Morion, saves you up to 50% or 9000 liters of water a year.

    Save on replacement filters

    Morion’s pre-filtration comprises of two filters that purifies all of the water passing through the filter, even the water that is drained later on.

    Thanks to Morion’s water efficiency, less water is filtered by two pre-filtration cartridges making them last longer and allowing you to save money.

    Easiest Service and Maintenance you could think of

    Cartridges can be easily replaced by following these simple steps: push the button; swing off and swing on until there is a “click” (a quarter turn).

    Morion storage tanks are designed to provide easy access for servicing and sanitization purposes. The membrane can be replaced completely – no need to replace the whole tank.

    Safe and reliable materials and design

    All parts of Morion are manufactured from food-grade recyclable materials during an environment-friendly production process.

    Morion is designed to operate at a pressure from 2 to 6 atm, and temporarily withstand up to 21 atm. 

  • Technical Specifications

    Size: 371x420x190 mm
    Filtration Rate: 190 L/day

    Contaminant Reduction

    Chlorine, Sulfates: 100%
    Hardness:  100%
    Nitrates: 50%
    Total mineralization:
    Organic contaminants:
    Ions of heavy metals (Lead, Cuprum, Mercury etc):
    Giardia cysts:
  • K1-02 Carbon Block, 0.3 micron

    Replaced every year.

    Replacement filter for deep purification of drinking water. Reduces all common impurities including chlorine, lead, bacteria and solid particles sized down to 5μm. Replaced with housing, which provides additional protection against bacteria.

    K1-07 Carbon Block, 0.8 micron

    Replaced every year.

    Replacement filter for final stage of drinking water purification. Removes all common impurities including chlorine, lead, bacteria and solid particles sized down to 0.8μm. Replaced with housing, which provides additional protection against bacteria.

    K-50 (Reverse Osmosis Membrane)

    Replaced every 2 years.

    Membrane Reverse osmosis membrane provides ultra filtration of all contaminants including cysts, bacteria and viruses. It also removes water hardness from any initial level. This membrane has performance of 7.8 liters per hour.

    K1-P Polypropylene (Sediment Filter), 20 micron

    Replaced every 2 years.

    Replacement sediment filter manufactured from 100% Polypropylene. It is used to retain solid particles such as sand and rust. Protects further stages of filtration and extends life of home appliances.

  • Frequently Asked Questions

    1. What distinguishes AQUAPHOR from other filters?

    The main advantage that AQUAPHOR water purifiers have over their competitors is through the use of AQUALEN chelating ion-exchange fibers (US patented). Unlike most companies that make and sell water filters, AQUAPHOR develops and produces all filtration components specifically with household water purification in mind. Quality is controlled at every step of production. Thanks to its proprietary technology, AQUAPHOR creates filtration mixtures that provide maximally pure water at a maximal speed.

    2. Why would AQUAPHOR filters suit me?

    The effectiveness of AQUAPHOR filters have been proven over many years of use on Russian and Eastern European tap water. There is no doubt that they can handle the significantly less problematic tap water found in Singapore, Europe, the US, and other countries. If you live an area with particularly dirty water, AQUAPHOR filters are the perfect solution: they work better and last longer than other filters.

    3. What kind of filtration materials are used in AQUAPHOR water filters?

    The main filtration capability of AQUAPHOR filters is enhanced by a specially-made mixture of AQUALEN fibers and high-quality granulated activated carbon. Thanks to the high absorption rate of the filtering material and a large effective surface area, water passing through the filter is rendered free of chlorine, phenols, chlororganic compounds, petroleum compounds, and pesticides in about 30 seconds.

    4. Do AQUAPHOR filters block bacteria?

    One of the important qualities of AQUAPHOR water filters is their bactericidal activity. AQUALEN fiber is impregnated with activated silver to achieve this end. Laboratory experiments show that the fibers can block and keep from reproducing 10,000 bacteria per gram of filtration mixture.

    5. Can AQUALEN filter purify water that doesn't come from the tap?

    If you use a well, artesian water source, or an open-air water source, it's absolutely crucial to reduce the potential pollutants that can come in from neighboring roads, fields, and farms. AQUAPHOR filters were developed to clean municipal tap water. Because of that, we cannot guarantee as high a level of performance when it comes to water from non-municipal sources. Nonetheless, AQUAPHOR filters will make your water significantly safer by filtering out organic compounds, heavy metals, and disease-causing bacteria. Water like this does need to be boiled before drinking.

    6. How long will my filter cartridge last?

    The scientific consensus is that a human being needs three liters of water a day. Your filter will have a lifetime liter rating. Divide that by three, and you will know how many days your filter will last one person. Divide by six if your household contains two people, nine if three, and so on.

    7. How can I tell when my filter cartridge is exhausted?

    Unfortunately, "eyeballing" the filter is impossible, as most harmful impurities and pollutants have no taste or smell. The only reliable way to tell when your filter is done is to count in advance how much water your family uses on average in a day, and then divide the filter rating by that number. Keep in mind that the rating isn't applied across the board – if you're cleaning particularly dirty water, the filter needs to be changed earlier.

    8. Can AQUAPHOR filters release the impurities they accumulated back into the water passing through them?

    No. The filtration mixture used in AQUAPHOR filters quickly and reliably binds water-borne pollutants. In order to release dangerous substances – heavy metal ions, for example – a filter has to be heated up to 600 degrees Celcius. This effectively means that impurities captured by an AQUAPHOR filter cannot be released back into your drinking water.

    9. What happens if hot water is passed through an AQUAPHOR filter?

    Nothing bad, though afterwards the filter will need to be rinsed with cold water for about five minutes. That aside, hot tap water is not drinkable and is much dirtier than cold water. Passing hot water through a filter drastically reduces its service life. AQUAPHOR also makes filters specifically for hot water use, such as AQUAPHOR Viking with hot water modules.

Category: Morion

Type: Aquaphor

Related Items